{"id":2012,"date":"2026-01-09T18:06:21","date_gmt":"2026-01-09T17:06:21","guid":{"rendered":"https:\/\/www.scanxpert.eu\/?page_id=2012"},"modified":"2026-02-16T13:37:15","modified_gmt":"2026-02-16T12:37:15","slug":"allgemeine-grundlagen","status":"publish","type":"page","link":"https:\/\/www.scanxpert.eu\/en\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/","title":{"rendered":"General principles"},"content":{"rendered":"

Anleitung f\u00fcr den perfekten 3D Scan<\/strong><\/p>\n\n\n\n

Part I \u2013 General Principles<\/h2>\n\n\n\n

This document is a guide for anyone new to 3D scanning. The advice contained herein provides general guidelines for optimizing scan results obtained with a 3D scanner. These tips refer to the technology used by ScanXpert: active stereo vision 3D scanning. Therefore, they are generally applicable to all 3D scanners in the same category, although some are specifically tailored to ScanXpert.<\/p>\n\n\n\n

Structured Light Technology<\/strong><\/h3>\n\n\n\n

Active stereo vision structured-light technology is an optical 3D scanning method for capturing the geometry of a physical object. A video projector illuminates the object with various shaped patterns that encode its different spatial positions (Fig. 1).<\/p>\n\n\n

\n
\"Lichtprofile,
Figure 1: Light profiles projected onto the object during 3D scanning.<\/figcaption><\/figure>\n<\/div>\n\n\n

Two cameras, in a stereo configuration, store the images of the scanned part and the software processes them to generate two coded images (see Fig. 2).<\/p>\n\n\n

\n
\"Draufsicht
Figure 2: Top view of the triangulation geometry of the 3D scanner.<\/figcaption><\/figure>\n<\/div>\n\n\n

Ein Bereichsbild wird durch Triangulation erfasst. Das Bereichsbild (Abb. 3) ist eine Art Bild, das die 3D-Koordinaten der Objektoberfl\u00e4che enth\u00e4lt.<\/p>\n\n\n

\n
\"Bereichsbild\"
Figure 3: Area image<\/figcaption><\/figure>\n<\/div>\n\n\n

3D model generation<\/strong><\/h3>\n\n\n\n

To obtain a complete 3D model, the entire area must be captured in different views, which must then be aligned and converted into a mesh of triangles, the digital model (see Figure 4).<\/p>\n\n\n

\n
\"ein
Figure 4: a complete digital 3D model (mesh).<\/figcaption><\/figure>\n<\/div>\n\n\n

TIPP!<\/em><\/strong> Proper optical alignment and calibration ensure accurate 3D model generation. These setup steps are required the first time you use the 3D scanner and subsequently only when you change the work area, as described in the quick start guide (see Fig. 5). It is strongly recommended that you follow the quick start guide step by step.<\/em><\/p>\n\n\n

\n
\"Vorschau
Figure 5: Preview of the included quick start guide.<\/figcaption><\/figure>\n<\/div>\n\n\n

Optimal scans<\/strong><\/h3>\n\n\n\n

To obtain an optimal 3D reconstruction, factors that can influence the outcome of the process must be taken into account:<\/p>\n\n\n\n

    \n
  1. the ambient light;<\/li>\n\n\n\n
  2. the object characteristics such as material, color and shape;<\/li>\n\n\n\n
  3. the background.<\/li>\n<\/ol>\n\n\n\n

    Ambient light<\/strong><\/h3>\n\n\n\n

    The ideal ambient light for using the 3D scanner is obtained in a room with normal daylight, where the only artificial light is generated by the scanner's projector (see Fig. 6).<\/p>\n\n\n

    \n
    \"Beispiel
    Figure 6: Example of a scene with perfect lighting.<\/figcaption><\/figure>\n<\/div>\n\n\n

    It is recommended to use homogeneous light of medium intensity. It should not shine directly on the scene (see Fig. 7) or on the 3D scanner (see Fig. 8).<\/p>\n\n\n

    \n
    \"Beispiel
    Figure 7: Example of a lighting condition to be avoided: a light that is directed straight at the object.\n
    <\/figcaption><\/figure>\n<\/div>\n\n
    \n
    \"Beispiel
    Figure 8: Example of a lighting condition to be avoided: a light shining directly onto the scanner.<\/figcaption><\/figure>\n<\/div>\n\n\n

    It is equally important that no shadow is projected onto the object (see Fig. 9).<\/p>\n\n\n

    \n
    \"Beispiel
    Figure 9: Example of a lighting condition to be avoided: a shadow projected onto the object.<\/figcaption><\/figure>\n<\/div>\n\n\n

    Direct sunlight can cause problems if it interferes with the projector light. It's best to avoid using the scanner in rooms where sunlight shines directly onto the object being scanned. Controlled ambient lighting is crucial to prevent suboptimal scanning results. Here are some errors that can occur due to poor lighting:<\/p>\n\n\n\n

      \n
    1. Waves caused by light reflected off the object
      (see Fig. 10);<\/li>\n\n\n\n
    2. Roughness on the scan surface caused by overexposure (see Figure 11);<\/li>\n\n\n\n
    3. A scan with an orange peel effect, referred to as \"noise\" when the projector light is lacking compared to the ambient light (see Fig. 12);<\/li>\n\n\n\n
    4. In the worst case, a scan with many missing areas results in holes on the surface of the digital model (see Fig. 13).<\/li>\n<\/ol>\n\n\n\n

      The use of the 3D scanner in outdoor environments is not recommended; use at night may be possible.<\/p>\n\n\n\n

      \n
      \n
      \"3D-Scan
      Figure 10: 3D scan showing waves on the surface.<\/figcaption><\/figure>\n<\/div><\/div>\n\n\n\n
      \n
      \"3D-Scan
      Figure 11: 3D scan with a rough scan surface.<\/figcaption><\/figure>\n<\/div><\/div>\n<\/div>\n\n\n\n
      \n
      \n
      \"3D-Scan
      Figure 12: 3D scan with missing areas.<\/figcaption><\/figure>\n<\/div><\/div>\n\n\n\n
      \n
      \"Orangenschaleneffekt
      Figure 13: Orange peel effect on the scan surface.\t<\/figcaption><\/figure>\n<\/div><\/div>\n<\/div>\n\n\n\n

      TIP!<\/em><\/strong> The exposure time, which controls the amount of light absorbed by the cameras, is preset in the IDEA software. In extreme cases where ambient light is a problem, it is possible to manually adjust the camera exposure time, either decreasing or increasing it to create more favorable conditions.<\/em><\/p>\n\n\n\n

      The following images show an object captured by the cameras under the correct lighting conditions with several exposure values: a lower exposure (see Fig. 14), a normal exposure (see Fig. 15) and a higher exposure (see Fig. 16).<\/p>\n\n\n

      \n
      \"Beispiel
      Figure 14: Example with low camera exposure. <\/figcaption><\/figure>\n<\/div>\n\n
      \n
      \"Beispiel
      Figure 15: Example of normal camera exposure.<\/figcaption><\/figure>\n<\/div>\n\n
      \n
      \"Beispiel
      Figure 16: Example of the high exposure of the cameras.<\/figcaption><\/figure>\n<\/div>\n\n\n

      PRO TIP! Changing the exposure time is also useful for capturing very dark details that cannot be achieved with a normal exposure setting (see Figs. 17-18).<\/p>\n\n\n

      \n
      \"Live-Ansicht
      Figure 17: Live view of the object with normal exposure and enhanced exposure.<\/figcaption><\/figure>\n<\/div>\n\n
      \n
      \"3D-Scan
      Figure 18: 3D scan of the object with normal and enhanced exposure. Please note the enhancement of the darkest parts of the hair.<\/figcaption><\/figure>\n<\/div>\n\n\n

      Object characteristics<\/h3>\n\n\n\n

      There are materials, colors, and shapes that are perfect for digitization, and others that cause critical errors.<\/p>\n\n\n\n

      Material<\/h4>\n\n\n\n

      Objects with a uniform, non-reflective, and opaque surface are best for scanning. This is because the light creates high-contrast patterns on the surface. Good examples include chalk, clay, and matte sandblasted surfaces. Shiny, polished, or reflective surfaces produce reflections from the projector light during scanning. Similar problems can arise with transparent or semi-transparent materials. In these materials, the light passes through the object's surface, preventing the formation of patterns. Some of these materials that are not recommended include mirrored surfaces, glass and other transparent surfaces, and glossy and metallic surfaces.<\/p>\n\n\n\n

      TIP!<\/em><\/strong> There are hardly any surfaces that cannot be scanned. To scan an object that presents the difficulties just described, simply spray it with a professional coating spray. The white layer allows for the correct pattern formation on the scanned surface and can be easily removed after scanning without damaging the object. Another option is to use a powder, such as talc.<\/em><\/p>\n\n\n\n

      - Color<\/h4>\n\n\n\n

      There are no color restrictions when scanning the object. However, lighter colors yield better results. It is not recommended to scan a model with a completely black or very dark surface, as the projected light will be absorbed by the object and the cameras will not capture enough data to create the 3D model. In this case, the scans will be noisy (orange peel effect).<\/p>\n\n\n\n

      TIP!<\/em><\/strong> The default setting for the \"Surface Color\" filter is a medium shade. However, it is possible to change this value and choose a lighter or darker shade. In this way, the filter's threshold can be adjusted to eliminate areas of lesser relevance (see Fig. 19).<\/em><\/p>\n\n\n

      \n
      \"Texturansicht
      Figure 19: Texture view showing gray before and very dark after the 3D scan. Please note the improvement in the darkest parts of the hair.\n
      <\/figcaption><\/figure>\n<\/div>\n\n\n

      PRO TIP! If, after the first scan, the 3D image color does not match the real model or is not good enough (see Fig. 20), it is possible to delete the result and perform a color adjustment (optical setup and scan calibration) (see Fig. 21).<\/p>\n\n\n

      \n
      \"3D-Scan
      Figure 20: 3D scan with texture before color calibration.<\/figcaption><\/figure>\n<\/div>\n\n
      \n
      \"3D-Scan
      Figure 21: 3D scan with texture after color calibration.<\/figcaption><\/figure>\n<\/div>\n\n\n

      Color calibration depends on the ambient light during the scan. Calibration must be performed optimally before scanning. It is recommended to perform color calibration before starting the scan sequence, as otherwise color differences may occur in the overlapping areas of the 3D scan (see Figs. 22-23).<\/p>\n\n\n

      \n
      \"Beispiele
      Figure 22: Examples of aligned 3D scans with different shading in the textures.<\/figcaption><\/figure>\n<\/div>\n\n
      \n
      \"Beispiele
      Figure 23: Examples of aligned 3D scans with homogeneous color tones in the textures.<\/figcaption><\/figure>\n<\/div>\n\n\n

      – Form<\/h4>\n\n\n\n

      The shape of the object can influence the scan output. For complex shapes, special attention must be paid to holes or cavities, hidden surfaces, or undercuts on the object's surface. In these cases, it is recommended to perform a larger number of scans from different angles. Outliers can then be removed using the tools available in the IDEA software. To obtain a clear scan, it is crucial that the object does not deform or move during the scanning process. Any vibration of the object during the scan phase will result in significant waviness and missing parts in the 3D image. A deformed object creates alignment problems, and a flawless 3D model cannot be generated. For these reasons, it is not advisable to scan animated objects such as body parts or other objects that can be easily bent or whose shape changes easily, like an extremely soft shoe sole.<\/p>\n\n\n\n

      TIP!<\/em><\/strong> To achieve the best positions for capturing the entire object surface, both the object and the scanner can be moved. It is recommended to utilize the tripod's capabilities. Please note that the correct distance between the projector and the model is important. You can check the correct distance in the software using LIVE mode (with the yellow crosshairs) (see Figs. 24-26).<\/em><\/p>\n\n\n

      \n
      \"Beispiel
      Figure 24: Example of a first image and corresponding 3D scan.<\/figcaption><\/figure>\n<\/div>\n\n
      \n
      \"Beispiel
      Figure 25: Example of a second image, where the scanner was moved to the left for the corresponding 3D scan.<\/figcaption><\/figure>\n<\/div>\n\n
      \n
      \"Beispiel
      Figure 26: Example of a third image where the scanner was placed even further to the left.<\/figcaption><\/figure>\n<\/div>\n\n\n

      It is recommended to utilize the tripod's capabilities. Note that the distance between the projector and the model is crucial. The correct distance can be easily checked in the IDEA software using LIVE mode (with the yellow crosshairs) (see Fig. 27).<\/p>\n\n\n

      \n
      \"Live-Ansichten
      Figure 27: Live views of the scanner's previous positions. Please note that the yellow crosshair is always on the projected vertical line.<\/figcaption><\/figure>\n<\/div>\n\n\n

      - Background<\/strong><\/h4>\n\n\n\n

      The technology used by Scan in a Box enables selective capture of the object. External elements (see Fig. 28) such as the background of the scene or the work surface are excluded from the scan of the object.<\/p>\n\n\n

      \n
      \"Live-Ansicht
      Figure 28: Live view of the object, with off-center field of view and colored background, as well as the corresponding 3D scan, cleaned and without exceeding object areas.<\/figcaption><\/figure>\n<\/div>\n\n\n

      In cases where the background is a similar color to the object, some external points may be detected (see Fig. 29). In this case, a manual selection tool or an automatic selection and cleaning tool in the IDEA software can be used to remove these points.<\/p>\n\n\n

      \n
      \"Live-Ansicht
      Figure 29: Live view of the object on a work surface of the same color and corresponding 3D scan with an excess part to be removed.<\/figcaption><\/figure>\n<\/div>\n\n\n

      TIP!<\/em><\/strong> A work surface with high contrast to the object's surface can achieve optimal results. It is recommended to use a dark, opaque surface such as a black mat as the working plane (see Fig. 30).<\/em><\/p>\n\n\n

      \n
      \"Live-Ansicht
      Figure 30: Live view of the object on a dark work surface and corresponding 3D scan, cleaned and without excess areas.<\/figcaption><\/figure>\n<\/div>\n\n\n

      <\/p>","protected":false},"excerpt":{"rendered":"

      Anleitung f\u00fcr den perfekten 3D Scan Teil I \u2013 Allgemeine Grundlagen Dieses Dokument ist eine Anleitung f\u00fcr alle, die sich zum ersten Mal mit dem 3D-Scannen befassen. Die in diesem Dokument enthaltenen Ratschl\u00e4ge sind allgemeine Richtlinien zur Optimierung des mit dem 3D-Scanner erhaltenen Scan-Ergebnisses. Diese Tipps beziehen sich auf die Technologie, die ScanXpert verwendet: das… Read More »General principles<\/span><\/a><\/p>","protected":false},"author":3,"featured_media":0,"parent":1891,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"neve_meta_sidebar":"","neve_meta_container":"","neve_meta_enable_content_width":"","neve_meta_content_width":0,"neve_meta_title_alignment":"","neve_meta_author_avatar":"","neve_post_elements_order":"","neve_meta_disable_header":"","neve_meta_disable_footer":"","neve_meta_disable_title":"","footnotes":""},"class_list":["post-2012","page","type-page","status-publish","hentry"],"yoast_head":"\nAllgemeine Grundlagen - ScanXpert 3D Scanner<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.scanxpert.eu\/en\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Allgemeine Grundlagen - ScanXpert 3D Scanner\" \/>\n<meta property=\"og:description\" content=\"Anleitung f\u00fcr den perfekten 3D Scan Teil I \u2013 Allgemeine Grundlagen Dieses Dokument ist eine Anleitung f\u00fcr alle, die sich zum ersten Mal mit dem 3D-Scannen befassen. Die in diesem Dokument enthaltenen Ratschl\u00e4ge sind allgemeine Richtlinien zur Optimierung des mit dem 3D-Scanner erhaltenen Scan-Ergebnisses. Diese Tipps beziehen sich auf die Technologie, die ScanXpert verwendet: das… Read More »Allgemeine Grundlagen\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.scanxpert.eu\/en\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/\" \/>\n<meta property=\"og:site_name\" content=\"ScanXpert 3D Scanner\" \/>\n<meta property=\"article:modified_time\" content=\"2026-02-16T12:37:15+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2026\/01\/Scanxpert-Lichtprofile.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"605\" \/>\n\t<meta property=\"og:image:height\" content=\"227\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"16 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/\",\"url\":\"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/\",\"name\":\"Allgemeine Grundlagen - ScanXpert 3D Scanner\",\"isPartOf\":{\"@id\":\"https:\/\/www.scanxpert.eu\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2026\/01\/Scanxpert-Lichtprofile.jpg\",\"datePublished\":\"2026-01-09T17:06:21+00:00\",\"dateModified\":\"2026-02-16T12:37:15+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#primaryimage\",\"url\":\"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2026\/01\/Scanxpert-Lichtprofile.jpg\",\"contentUrl\":\"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2026\/01\/Scanxpert-Lichtprofile.jpg\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\/\/www.scanxpert.eu\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Hilfe\",\"item\":\"https:\/\/www.scanxpert.eu\/hilfe\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"ScanXpert FX\",\"item\":\"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Allgemeine Grundlagen\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.scanxpert.eu\/#website\",\"url\":\"https:\/\/www.scanxpert.eu\/\",\"name\":\"ScanXpert 3D Scanner\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\/\/www.scanxpert.eu\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.scanxpert.eu\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.scanxpert.eu\/#organization\",\"name\":\"ScanXpert 3D Scanner\",\"url\":\"https:\/\/www.scanxpert.eu\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\/\/www.scanxpert.eu\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2025\/01\/favicon-128x128-1.png\",\"contentUrl\":\"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2025\/01\/favicon-128x128-1.png\",\"width\":128,\"height\":128,\"caption\":\"ScanXpert 3D Scanner\"},\"image\":{\"@id\":\"https:\/\/www.scanxpert.eu\/#\/schema\/logo\/image\/\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Allgemeine Grundlagen - ScanXpert 3D Scanner","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.scanxpert.eu\/en\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/","og_locale":"en_GB","og_type":"article","og_title":"Allgemeine Grundlagen - ScanXpert 3D Scanner","og_description":"Anleitung f\u00fcr den perfekten 3D Scan Teil I \u2013 Allgemeine Grundlagen Dieses Dokument ist eine Anleitung f\u00fcr alle, die sich zum ersten Mal mit dem 3D-Scannen befassen. Die in diesem Dokument enthaltenen Ratschl\u00e4ge sind allgemeine Richtlinien zur Optimierung des mit dem 3D-Scanner erhaltenen Scan-Ergebnisses. Diese Tipps beziehen sich auf die Technologie, die ScanXpert verwendet: das… Read More »Allgemeine Grundlagen","og_url":"https:\/\/www.scanxpert.eu\/en\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/","og_site_name":"ScanXpert 3D Scanner","article_modified_time":"2026-02-16T12:37:15+00:00","og_image":[{"width":605,"height":227,"url":"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2026\/01\/Scanxpert-Lichtprofile.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Estimated reading time":"16 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/","url":"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/","name":"Allgemeine Grundlagen - ScanXpert 3D Scanner","isPartOf":{"@id":"https:\/\/www.scanxpert.eu\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#primaryimage"},"image":{"@id":"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#primaryimage"},"thumbnailUrl":"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2026\/01\/Scanxpert-Lichtprofile.jpg","datePublished":"2026-01-09T17:06:21+00:00","dateModified":"2026-02-16T12:37:15+00:00","breadcrumb":{"@id":"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/"]}]},{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#primaryimage","url":"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2026\/01\/Scanxpert-Lichtprofile.jpg","contentUrl":"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2026\/01\/Scanxpert-Lichtprofile.jpg"},{"@type":"BreadcrumbList","@id":"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/allgemeine-grundlagen\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/www.scanxpert.eu\/"},{"@type":"ListItem","position":2,"name":"Hilfe","item":"https:\/\/www.scanxpert.eu\/hilfe\/"},{"@type":"ListItem","position":3,"name":"ScanXpert FX","item":"https:\/\/www.scanxpert.eu\/hilfe\/scanxpert-fx\/"},{"@type":"ListItem","position":4,"name":"Allgemeine Grundlagen"}]},{"@type":"WebSite","@id":"https:\/\/www.scanxpert.eu\/#website","url":"https:\/\/www.scanxpert.eu\/","name":"ScanXpert 3D Scanner","description":"","publisher":{"@id":"https:\/\/www.scanxpert.eu\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.scanxpert.eu\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":"Organization","@id":"https:\/\/www.scanxpert.eu\/#organization","name":"ScanXpert 3D Scanner","url":"https:\/\/www.scanxpert.eu\/","logo":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.scanxpert.eu\/#\/schema\/logo\/image\/","url":"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2025\/01\/favicon-128x128-1.png","contentUrl":"https:\/\/www.scanxpert.eu\/wp-content\/uploads\/2025\/01\/favicon-128x128-1.png","width":128,"height":128,"caption":"ScanXpert 3D Scanner"},"image":{"@id":"https:\/\/www.scanxpert.eu\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.scanxpert.eu\/en\/wp-json\/wp\/v2\/pages\/2012","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.scanxpert.eu\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.scanxpert.eu\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.scanxpert.eu\/en\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.scanxpert.eu\/en\/wp-json\/wp\/v2\/comments?post=2012"}],"version-history":[{"count":35,"href":"https:\/\/www.scanxpert.eu\/en\/wp-json\/wp\/v2\/pages\/2012\/revisions"}],"predecessor-version":[{"id":2082,"href":"https:\/\/www.scanxpert.eu\/en\/wp-json\/wp\/v2\/pages\/2012\/revisions\/2082"}],"up":[{"embeddable":true,"href":"https:\/\/www.scanxpert.eu\/en\/wp-json\/wp\/v2\/pages\/1891"}],"wp:attachment":[{"href":"https:\/\/www.scanxpert.eu\/en\/wp-json\/wp\/v2\/media?parent=2012"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}